Installing the DC machine needs attention
ZHAOWEI is the development and production of gear transmission products of the national high-tech enterprises, to provide customers with transmission scheme design, parts and tooling design and manufacturing, parts production and integrated assembly of the full range of services.
Installation direction is the same with quality inspection level. Install in other direction may lead to lubricant leak, load change and cause level characteristics change.
Output shaft machining
Different size and material output shaft provided according to clients requirements. Load, rush, powder cut in machining may damage the products.
Gearbox position adjustment
When installing the components, please do not adjust the position by rotating the output shaft which may damage the gear internal and the motor be generator.
Overload & stall
When the motor running, heat occurs due to the energy conversion, the temperature will be gradually increased. Load within the rated range, the occurrence and distribution heat are balanced so the coil will not burn out. However over load and stall state will increase heat. Long time running at this state, the insulating film will be damaged and cause short-circuits, as a result, motor will be burn out.
Power accumulated
Some DC motor use carbon brush. Rotating motor commutator friction with carbon brush cause sparks on commutator. When running at low speed, power caused by the friction of commutator and brush will accumulated and occur short-circuit, burn out the motor and drive, please pay special attention.
Electromagnet noise
For DC motor, sparks cause by carbon brush and commutator lead to electromagnet noise. Noise in wire or radiate out will effect machine around. Our engineers has optimal solution to solve it.
Storage
Please do not store it at high temperyature or humidity environment.
More detail information, please visit at www.zwgearbox.com or contact us hotline [86-755-27322652]
评论
发表评论