How to prolong the life of gear reducer

Gear reducer is an important part of transmission equipment. It plays a vital role in improving the load-carrying capacity and service life of gear reducer. After selecting the type of reducer, lubricating oil (gear oil or oil) is added and installed on the worktable. The height gauge is used to measure and adjust the test instruments and test instruments. The center height of the reducer. After they are at the same central height, they are fixed by bolts and gaskets, and run-in test is carried out with small loads. After running for a period of time, the lubricant is poured out to check whether there is metal powder in the oil, and then cleaned again. Then the lubricant is added to restart the fall run-in until no metal powder is found. Finally, the lubricating oil seal was re-added and the load was increased to carry out the test.

For the first time use of gear reducer, it is indispensable to carry out trial operation first. Many users often neglect this preliminary work, which eventually leads to poor operation of the reducer or damage to the reducer, thus increasing the cost of investment. Therefore, the trial operation of gear reducer is helpful for users to reduce costs, thus greatly improving the service life and quality of gear reducer.

Portal：https://www.zwgearbox.com/