The precision planetary reducer should be cleaned up immediately after it is used up.

In the process of using precise planetary reducer, if you want to get a better effect and ensure that the reducer has a better service life, then you can not come in disorder while operating, but need to pay attention to these problems. The first is to use the reducer before you must. First conduct a comprehensive check to see if the reducer is in good condition, whether all parts are connected to the position, whether the valve is loose, etc., until all is in normal condition, can be used formally.

In the process of using precise planetary reducer, we should pay attention to the state of the reducer in time, whether there is excessive loosening, abnormal leakage, or abnormal high temperature, etc. If abnormal situation occurs, we should immediately close the valve, find out the cause of the problem, and then use it after processing, which is also the case. It's very important that you don't take chances, feel nothing unusual, or want to wait until you use it, and stop checking immediately after you find it.

Finally, after the use of the precise planetary reducer, it needs to be cleaned immediately. After the valve closes, it should be cleaned with soft cloth. Some impurities and dirt may be removed from the reducer, and lubricated with good lubricant, so that it can be better protected. Once use, such treatment should be carried out after each use of the equipment. We should not be bothered. We must carry out the corresponding operation in place so as to bring the best deceleration effect and really help everyone best.

Portal：https://www.zwgearbox.com/