Need to pay attention to the gear reducer seal
Gear reducers are usually installed in places with poor environmental conditions. Inhalation of air containing particulate matter, dust, and corrosive gases can affect the service life of compressor lubricants. It is recommended to consider installing air intake filters, and should be cleaned regularly and periodically. Intake filter.
The gears of the gear reducer should pay attention to the following points:
1. Do not fill any gasket between the split surfaces of the box, but apply sealant or water glass to ensure sealing;
2. When assembling, before tightening the box bolt, use a 0.05mm feeler gauge to check the tightness between the joint surface of the box cover and the box seat;
3. The shaft extension seal should be coated with grease. Each sealing device should be installed in strict accordance with the requirements.
Portal：https://www.zwgearbox.com/
The gears of the gear reducer should pay attention to the following points:
1. Do not fill any gasket between the split surfaces of the box, but apply sealant or water glass to ensure sealing;
2. When assembling, before tightening the box bolt, use a 0.05mm feeler gauge to check the tightness between the joint surface of the box cover and the box seat;
3. The shaft extension seal should be coated with grease. Each sealing device should be installed in strict accordance with the requirements.
Portal：https://www.zwgearbox.com/
评论
发表评论