Under what circumstances does the gear reducer detect the insulation resistance?
Insulation resistance of gear reducer, as its name suggests, is used to reduce the current and voltage flowing through the gear reducer while maintaining a relatively stable current and voltage environment. Then, under what circumstances does the insulation resistance of the gear reducer need to be tested?
1. The newly purchased gear reducer needs to be tested for insulation resistance before it is put into use.
2. The gear reducer has not been used for at least 3 months, and is put into use again;
3. When the gear reducer encounters a fault for minor repairs or large repairs, it is also necessary to test its insulation resistance;
4. After the equipment is damp due to special reasons, the insulation resistance must be tested to prevent the gear reducer from malfunctioning during use.
Under normal circumstances, we test the insulation resistance of the gear reducer is carried out using a shaker. Because the DC test voltage generated by the shaker is constant, and the voltage level of the megohmmeter used for different dielectric strength grades is different, therefore, It should be determined according to the specific situation to ensure the stable operation of the gear reducer.
Portal：https://www.zwgearbox.com/
1. The newly purchased gear reducer needs to be tested for insulation resistance before it is put into use.
2. The gear reducer has not been used for at least 3 months, and is put into use again;
3. When the gear reducer encounters a fault for minor repairs or large repairs, it is also necessary to test its insulation resistance;
4. After the equipment is damp due to special reasons, the insulation resistance must be tested to prevent the gear reducer from malfunctioning during use.
Under normal circumstances, we test the insulation resistance of the gear reducer is carried out using a shaker. Because the DC test voltage generated by the shaker is constant, and the voltage level of the megohmmeter used for different dielectric strength grades is different, therefore, It should be determined according to the specific situation to ensure the stable operation of the gear reducer.
Portal：https://www.zwgearbox.com/
评论
发表评论