Storage and maintenance of gear reducer
Gear reducers are the most common and most common type of reducer equipment. For such high-frequency, high-wear reducer equipment, its preservation and maintenance work is particularly important. Otherwise, the gear reducer operates under high-intensity working pressure, and the wear is severe, and naturally it is easy to reduce the working efficiency of the gear reducer and shorten its service life. So, what do we need to do for the storage and maintenance of the gear reducer?
First of all, the storage environment is very important, dry, ventilated, non-corrosive is the most basic requirement, there is also a need to pay attention to the less gray layer, and also pay attention to whether there are other unsuitable or unfavorable environment for gear reducer storage;
Secondly, the ambient humidity of the gear reducer storage and maintenance must not exceed 60%, otherwise the equipment will be affected by the environmental humidity;
Third, the ambient temperature change should not be too large, and the stored ambient temperature is controlled between -5°C and 50°C;
Fourth, avoid direct sunlight or ultraviolet light to the gear reducer equipment;
Fifth, it is strictly forbidden to place the gear reducer in the vicinity of corrosive substances, otherwise the equipment is easily damaged by these corrosive substances;
Sixth, it is not possible to stack the gear machine equipment, but to place it in a stable position;
Finally, apply a small amount of grease to the output shaft of the gear reducer. This maintenance can prevent the equipment from rusting.
Portal：https://www.zwgearbox.com/
First of all, the storage environment is very important, dry, ventilated, non-corrosive is the most basic requirement, there is also a need to pay attention to the less gray layer, and also pay attention to whether there are other unsuitable or unfavorable environment for gear reducer storage;
Secondly, the ambient humidity of the gear reducer storage and maintenance must not exceed 60%, otherwise the equipment will be affected by the environmental humidity;
Third, the ambient temperature change should not be too large, and the stored ambient temperature is controlled between -5°C and 50°C;
Fourth, avoid direct sunlight or ultraviolet light to the gear reducer equipment;
Fifth, it is strictly forbidden to place the gear reducer in the vicinity of corrosive substances, otherwise the equipment is easily damaged by these corrosive substances;
Sixth, it is not possible to stack the gear machine equipment, but to place it in a stable position;
Finally, apply a small amount of grease to the output shaft of the gear reducer. This maintenance can prevent the equipment from rusting.
Portal：https://www.zwgearbox.com/
评论
发表评论