Automotive Damper Actuator

-

ZHAOWEI micro-drive system can be applied to automobile damper actuators. By adjusting and optimizing the structure of the damper controller gearbox, it can improve the accuracy of the damper control angle and reduce gear damage caused by long-term use.


Challenges: accurate moving angle, the service life of the gear motor



Achievement: optimize gear parameters such as backlash and profile modification

The gearbox for the damper actuator mentioned above is only shown as a case that is developed for specific customers. It can be also customized according to customer requirements.

评论

发表评论

此博客中的热门博文

Heat treatment method of planetary reducer

-
Choosing good material of planetary reducer is conducive to improving the bearing capacity and service life of gear reducer. In view of the structural characteristics of precision reducer and the load characteristics of gears, hard tooth face gears should be widely used. There are many heat treatment methods to obtain hard face gear. For example, surface quenching, whole quenching, carburizing quenching and nitriding should be selected according to the characteristics of gear reducer. 1. Surface hardening The common surface quenching methods are high frequency quenching (for small size gears) and flame quenching (for large size gears). When the hardened layer of surface hardening includes the bottom of the tooth root, the effect is the best. The hardness of tooth surface can reach 45-55HRC. 2. Nitriding The application of nitriding can ensure that the gear can achieve high hardness and wear resistance under the condition of minimum deformation. After heat treatment, ...
阅读全文

How to solve the wear fault of gear reducer

-
Gear reducers are generally used in low-speed, high-torque transmission equipment, but in fact gear reducers are often used in high-speed mechanical environments, so it is inevitable to withstand multiple types of friction. If not protected, wear failures are likely to occur. Such problems often occur, so we should learn to deal with these wear and tear. There are three kinds of wear faults of the gear reducer. One is the wear of the bearing chamber of the gear reducer, which includes the wear of the bearing housing, the bearing housing of the housing, and the bearing housing of the transmission. The second is the shaft diameter of the gear reducer gear shaft wear, the main wear parts are in the shaft head, keyway and so on. The third is the bearing wear of the gear reducer drive shaft. For the wear failure of the gear reducer, the traditional solution is repairing after repair welding or brush plating, but both have certain drawbacks. Generally, the thermal stress generated by th...
阅读全文

DC Reduction Gear Motors manufacturer

-
图片
The DC Gear motor , consisting of a DC electric motor and a gearbox, is at the heart of several electrical and electronic applications. ZHAOWEI have been designing and developing such high quality mini DC gear motors in an easy-to-mount package for a range of products and equipment. Our miniature gear motor work smoothly and efficiently, supporting these electrical and electronic applications. These geared motors have reduction gear trains capable of providing high torque at relatively low shaft speed or revolutions per minute (RPM).  ZHAOWEI DC geared motors reduce the complexity and cost of designing and constructing applications such as industrial equipment, actuators, medical tools, and robotics. ZHAOWEI has engineered a range of planetary and spur gear motors (also known as mini-geared motors and micro-geared motors) suitable for many future and existing applications. The main characteristics of these gear motors are miniature form factors, offering significant strength...
阅读全文