Electric Head Restraint Gearbox

-

The head restraint is a pad at the top of an automobile seat. In common traffic accidents, such as rear-end collisions, passengers are vulnerable to neck injuries. The purpose of a head restraint is to prevent whiplash injury of the neck in rear-impact crashes. Luckily, the ZHAOWEI gearbox for active head restraint (AHR) can improve the effectiveness of active head restraints.



Active head restraint (AHR) is a mechanical system. The upper cushion support is a pressure plate connected to the seatback through a connecting rod. When the car was rear-ended, the passenger's body was impacted. The impact force will hit the backrest and push the pressure plate back. The headrest will be pushed forward to push the passenger's head and neck, preventing or reducing the possibility of injury before the head and neck swing. The collision activation device is placed inside the headrest. When activated, the device moves the entire headrest upward through the metal support column to protect the head and neck of the passenger.




 💁 Drive System for Active Headrest

The headrest mechanism includes a control module, a drive motor, and a connecting drive mechanism. The control system and the drive motor interact through signals. The connecting drive mechanism includes an upper cross link mechanism arranged in parallel, a lower crosslink mechanism, and a drive screw connected to the motor. When a dangerous situation occurs, the control module uses a single-chip microcomputer or on-board computer to control the forward rotation of the motor. When the two nuts move toward each other, the head restraint is unfolded through the connecting drive mechanism. When the dangerous conditions are eliminated, the control motor will reverse. The two nuts move backward, and the cushion mechanism folds the headrest. The drive motor/gearbox must meet specific requirements: it should have the characteristics of low noise, reliability, quick start, and strong vibration resistance, which are the requirements that ZHAOWEI gearbox can meet.

The AHR gearbox mentioned above is only shown as a case that is developed for specific customers. It can be also customized according to customer requirements.


评论

发表评论

此博客中的热门博文

Heat treatment method of planetary reducer

-
Choosing good material of planetary reducer is conducive to improving the bearing capacity and service life of gear reducer. In view of the structural characteristics of precision reducer and the load characteristics of gears, hard tooth face gears should be widely used. There are many heat treatment methods to obtain hard face gear. For example, surface quenching, whole quenching, carburizing quenching and nitriding should be selected according to the characteristics of gear reducer. 1. Surface hardening The common surface quenching methods are high frequency quenching (for small size gears) and flame quenching (for large size gears). When the hardened layer of surface hardening includes the bottom of the tooth root, the effect is the best. The hardness of tooth surface can reach 45-55HRC. 2. Nitriding The application of nitriding can ensure that the gear can achieve high hardness and wear resistance under the condition of minimum deformation. After heat treatment, ...
阅读全文

How to solve the wear fault of gear reducer

-
Gear reducers are generally used in low-speed, high-torque transmission equipment, but in fact gear reducers are often used in high-speed mechanical environments, so it is inevitable to withstand multiple types of friction. If not protected, wear failures are likely to occur. Such problems often occur, so we should learn to deal with these wear and tear. There are three kinds of wear faults of the gear reducer. One is the wear of the bearing chamber of the gear reducer, which includes the wear of the bearing housing, the bearing housing of the housing, and the bearing housing of the transmission. The second is the shaft diameter of the gear reducer gear shaft wear, the main wear parts are in the shaft head, keyway and so on. The third is the bearing wear of the gear reducer drive shaft. For the wear failure of the gear reducer, the traditional solution is repairing after repair welding or brush plating, but both have certain drawbacks. Generally, the thermal stress generated by th...
阅读全文

DC Reduction Gear Motors manufacturer

-
图片
The DC Gear motor , consisting of a DC electric motor and a gearbox, is at the heart of several electrical and electronic applications. ZHAOWEI have been designing and developing such high quality mini DC gear motors in an easy-to-mount package for a range of products and equipment. Our miniature gear motor work smoothly and efficiently, supporting these electrical and electronic applications. These geared motors have reduction gear trains capable of providing high torque at relatively low shaft speed or revolutions per minute (RPM).  ZHAOWEI DC geared motors reduce the complexity and cost of designing and constructing applications such as industrial equipment, actuators, medical tools, and robotics. ZHAOWEI has engineered a range of planetary and spur gear motors (also known as mini-geared motors and micro-geared motors) suitable for many future and existing applications. The main characteristics of these gear motors are miniature form factors, offering significant strength...
阅读全文